POWERTIG 200DV
A long time standard in the Everlast lineup, the PowerTIG 200 models have been placed in all sorts of demanding conditions since 2009. It's a favorite among light and medium fabricators who want a simple interface, but still want to have upscale features. Undoubtedly, the newest version of the PowerTIG 200DV is the best yet. It is more efficient and power "sipping" than ever. It also has been fine tuned is more robust than ever. The new stackable PowerCool 375 cooler matches perfectly to the PowerTIG 200DV and adds to the appeal of the unit. Able to operate on 120V or 240V single phase 50/60Hz, the unit offers maximum go-anywhere performance. The unit is definitely portable, and can be used with any generator that is rated for 8500W (240V) surge watts and is certified by the manufacturer as "clean power". If you need a reliable, TIG welder that you can carry with you and make quality welds day-in and day-out, the PowerTIG 200DV is definitely one to consider.
Now with HV Start. This is an advanced type of HF arc start with electronic control rather than older point gap style starts that required maintenance.
A long time standard in the Everlast lineup, the PowerTIG 200 models have been placed in all sorts of demanding conditions since 2009. It's a favorite among light and medium fabricators who want a simple interface, but still want to have upscale features. Undoubtedly, the newest version of the PowerTIG 200DV is the best yet. It is more efficient and power "sipping" than ever. It also has been fine tuned is more robust than ever. The new stackable PowerCool 375 cooler matches perfectly to the PowerTIG 200DV and adds to the appeal of the unit. Able to operate on 120V or 240V single phase 50/60Hz, the unit offers maximum go-anywhere performance. The unit is definitely portable, and can be used with any generator that is rated for 8500W (240V) surge watts and is certified by the manufacturer as "clean power". If you need a reliable, TIG welder that you can carry with you and make quality welds day-in and day-out, the PowerTIG 200DV is definitely one to consider.
Now with HV Start. This is an advanced type of HF arc start with electronic control rather than older point gap style starts that required maintenance.
A long time standard in the Everlast lineup, the PowerTIG 200 models have been placed in all sorts of demanding conditions since 2009. It's a favorite among light and medium fabricators who want a simple interface, but still want to have upscale features. Undoubtedly, the newest version of the PowerTIG 200DV is the best yet. It is more efficient and power "sipping" than ever. It also has been fine tuned is more robust than ever. The new stackable PowerCool 375 cooler matches perfectly to the PowerTIG 200DV and adds to the appeal of the unit. Able to operate on 120V or 240V single phase 50/60Hz, the unit offers maximum go-anywhere performance. The unit is definitely portable, and can be used with any generator that is rated for 8500W (240V) surge watts and is certified by the manufacturer as "clean power". If you need a reliable, TIG welder that you can carry with you and make quality welds day-in and day-out, the PowerTIG 200DV is definitely one to consider.
Now with HV Start. This is an advanced type of HF arc start with electronic control rather than older point gap style starts that required maintenance.
Features & Benefits:
Reliable IGBTs for stable inverter performance
120V/240V Dual Voltage input
Low as 5 Amp start for TIG in DC/ 20 Amp in AC.
Pre flow and Post flow control for maximum shielding gas protection before and after
Color coded controls are easy to identify and understand
Lift start function for use when HF is not desireable
AC cleaning range adjustment of 30-70% offers good control over cleaning/penetration ratio
240V Outlet in rear for optional WC 300 water cooler
Pre flow and Post flow control for gas
Arc force control (DIG) for stick helps to reduce spatter and improve arc performance
Pulse frequency ranges from .5-150 Hz in AC and DC mode
HV Start.
Standard Equipment Included:
12 ft. Everlast 26 Series TIG torch with 35 series DINSE stle connectors and torch switch for 2T/4T operation
Stick electrode holder with 10 ft. cable and 35 series DINSE style connectors
Work clamp with 10 ft. cable and DINSE style connectors
Foot pedal
Everlast regulator made from billet brass
240/120V Pigtail Adapter
6 ft. Power input cable
Consumable Starter Kit (Tungsten not included)